Acuo LED Sconce Installation Instructions.pdf

## Acuo LED Sconce Installation Instructions Summary:

These instructions detail the installation of the Acuo LED sconce. Key points include:

Pre-Installation:

Power Off: Turn off power to the junction box before beginning.
Qualified Electrician: This installation requires a qualified electrician due to electrical work.
Junction Box: The sconce is designed for standard 4" junction boxes with either a 3" round plaster ring or an octagon junction box.
Location: Suitable only for indoor dry locations.

Installation Steps:

1. Mounting Plate:
Attach the mounting plate to the junction box using #8-32 screws.
Secure a ground wire to the green screw on the mounting plate.

2. Wiring:
Connect white (neutral) and black (hot) wires from the fixture to the corresponding lines in the junction box using wire nuts.

3. Back Plate:
Mount the back plate to the mounting plate with supplied screws.

4. Shade Attachment:
Slide the shade onto posts on the back plate until flush with the wall.
Secure the top mounting blocks inside the shade with two screws.

Electrical Connections (0-10V Dimming):

The sconce includes a universal LED driver for 120-277V AC input.
Purple and grey leads enable dimming through a compatible 0-10V dimmer (wiring instructions provided with dimmer).
* Important: If not using a 0-10V dimmer, snip off tinned ends of these leads and cap them individually to prevent short circuits.