Foam Board Clubba Building Instructions.pdf

The article provides a step-by-step guide on building a model airplane using foam board and other materials. The main tools required include a straight edge, sharp knife, sanding block, hot glue gun, and fine-pointed pen. The build process involves several steps, including:

1. Cutting out the fuselage box parts and assembling them using epoxy or aliphatic PVA glue.
2. Cutting out the fuselage pattern from foam board and gluing it to the fuselage box.
3. Gluing the fuselage sides to the ply box using Gorilla polyurethane glue.
4. Creating the fuselage top and hatch from 1/8th balsa sheet.
5. Adding servo plates, motor mounting plate, and other components.
6. Building the elevator from Coreflute and attaching it to the fuselage.
7. Creating the rudder from foam board and attaching it to the elevator.
8. Building the wings from foam board, including cutting out the patterns and folding the top half over.
9. Assembling the wings, including gluing the spar, ribs, and packer strips in place.

The article also provides tips and warnings, such as removing the paper from the inside of the wing sheet to allow for even bending, and using a slow epoxy bog to allow for adjustments during gluing.