Block Paving Stabiliser.pdf

Reduces maintenance costs
Resists jointing sand removal
Withstands vacuum cleaning
Strengthens pavements
Inhibits water/fuel penetration and weed growth
Long performance life
Easy to apply
Stable under normal UV radiation

Technical Data:

Composition: Water-based acrylic
Appearance: Opaque on application, clears once cured
Components: 1
Usage: Exterior and interior
Application tools: Watering can, low-pressure spray system, foam rubber squeegee
Suitable for: Concrete block pavers
Pack size: 25L
Coverage: 2-2.5m2 per liter
Curing time: 12-24 hours
Shelf life: 24 months

Areas of Use:

Footpaths
Pedestrian precincts
Domestic driveways
Office car parks
Retail parks and highways

Preparation and Application:

Surfaces must be dry, free from grease, oil, dirt, and previous coatings
Joints should be filled with clean, dry compacted sand
Apply when blocks, jointing sand, and bedding sand are dry
Ground temperatures should be between 10°C and 30°C
Use a watering can, low-pressure spray system, or foam rubber squeegee to apply
Remove unabsorbed liquid from the surface of the pavers

Safety:

Must not be flushed down drains or allowed to enter open water courses
Follow general safety information on product labels
Material Safety Data Sheets are available
* Remove food products from the area during application and cure