Dunlop Multipurpose Acrylic Render Specifications.pdf

- Toll Free Service: 1800 222 841 (Aust), 0800 224 070 (NZ)
- Product: Acrylic render suitable for indoor and outdoor use over various surfaces (brickwork, AAC blocks, concrete)
- Application Range: 2-10mm thickness, not suitable over FC Sheet/Blueboard
- Surface Preparation: Clean, allow green concrete to cure, dampen dry/porous surfaces, prime porous concrete
- Mixing: Add 3.0-3.5L water, gradually add 20kg render, mix, allow to stand, remix, apply within 1 hour
- Application: Use steel trowel, check level, finish with float or sponge, useable for 1 hour
- Drying Time: Touch dry in 2-4 hours, second coat after 6-8 hours, full cure in 7 days, 1 day cure per 2mm thickness before decorative finish
- Coverage: 20kg covers 6.5m² at 2mm, 2.6m² at 5mm, 1.3m² at 10mm
- Clean Up: Clean tools in water immediately
- Shelf Life: 12 months in original packaging, dry place at 23°C and 50% humidity
- Precautions: Not for floors or painted surfaces, avoid extreme temperatures and conditions
- Safety: May cause irritation, rinse eyes with water, wear protective gear, ventilate, store locked up, dispose thoughtfully
- Guarantee: 10-year guarantee against manufacturing defects, limited to replacement, repair, or cost
- Disclaimer: Information given in good faith, use correctly, confirm suitability, follow Australian Standards, check terms and warranties