Safety Data Sheet For HEXFIX GAP Filler.pdf

# Safety Data Sheet for HEXFIX GAP FILLER

## Product Information:
- Product Name: HEXFIX GAP FILLER
- Reference No: LNSGHSEN002949
- Issued: 22 September 2023
- Version: 2.0

## Hazards Identification:
This product is classified as hazardous but not dangerous goods according to Safe Work Australia's GHS criteria.

Signal Word: Warning

Hazard Classifications:
- Skin Corrosion/Irritation (Category 2)
- Sensitisation - Skin (Category 1)

Hazard Statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.

## Precautionary Statements:
- P102: Keep out of reach of children.
- P103: Read and follow all instructions carefully.
- P261: Avoid breathing in dust, fumes, gases, mists, or vapours.
- P264: Wash hands, face, and exposed skin thoroughly after handling.
- P272: Contaminated work clothing should not leave the workplace.
- P280: Wear protective gloves, clothing, and eye/face protection.

## Response Statements:
- P101: If medical advice is needed, have the product container or label available.
- P302+P352: IF ON SKIN, wash with plenty of water and soap.
- P333+P313: In case of skin irritation or rash, seek medical attention.
- P362+P364: Remove contaminated clothing and wash before reuse.

## Storage and Disposal:
- Storage: Keep in a cool, dry, well-ventilated area, out of direct sunlight. Store away from foodstuffs, incompatible materials, heat sources, and ignition sources. Maintain containers closed when not in use.
- Disposal: Dispose of contents/container according to local, regional, national, and international regulations.

## Composition Information:
Chemical Entities:
- CAS No 27138-31-4 (Oxydipropyl dibenzoate): 1% (w/w)
- CAS No 26172-55-4 (5-Chloro-2-methyl-4-isothiazolin-3-one (CMIT)): <0.1% (w/w)

Other ingredients are determined to be non-hazardous or below reporting limits.

## First Aid Measures:
- Inhalation: Remove from exposure, loosen clothing, keep warm, and rest until fully recovered. Seek medical advice if symptoms persist.
- Skin Contact: Immediately flush skin with water for 15 minutes or until advised to stop by a Poisons Information Centre or doctor.
- Eye Contact: Wash out immediately with water, then seek medical advice.
- Ingestion: Rinse mouth with water, do not induce vomiting, and give a glass of water. Never give anything by mouth to an unconscious patient.

## Fire Fighting Measures:
- Hazchem Code: Not applicable.
- Extinguishing Media: Water fog, alcohol-resistant foam, standard foam, or dry agent (carbon dioxide, dry chemical powder).
- Specific Hazards: Non-combustible material; residual material can burn if ignited after evaporation of aqueous component.

## Accidental Release Measures:
- Small Spills: Wear protective gear, prevent inhalation and eye contact, and wipe up with absorbent materials. Collect and seal in labelled containers for disposal.
- Large Spills: Evacuate area, control dust, cover with damp inert material, sweep or vacuum (avoiding generation of dust), and collect for disposal. Inform local emergency services if contamination of water ways or crops occurs.

## Exposure Controls/Personal Protection:
- National occupational exposure limits not assigned for this material by Safe Work Australia.
- Biological Limit Values: As per national regulations, no limit is allocated for the ingredients in this product.
- Engineering Controls: Ensure natural ventilation is adequate.
- Personal Protective Equipment: Safety shoes, overalls, gloves, and safety glasses. Wash hands thoroughly after use.
- Hygiene Measures: Keep away from food, drink, and animal feeding stuffs. Avoid contact with clothing and eye/skin contact.