Akrapovič Heat Shield Installation Instructions For Yamaha YZF-R3 And MT-03.pdf

# Akrapovic Heat Shield Installation Instructions for Yamaha YZF-R3 and MT-03 (Revision 1.0, October 2019)

## Safety First
- This manual is specific to the Yamaha YZF-R3 and MT-03 motorcycles.
- Only skilled individuals should install and maintain the Akrapovic exhaust system to ensure safety.
- The exhaust system can become extremely hot; allow it to cool down before installation or maintenance.
- Secure your motorcycle to prevent tipping over.
- Verify that all parts are present and correct before proceeding with installation. Contact your retailer if any parts are missing.

## General Information and Legal Notices
- Akrapovic trademarks, logos, and emblems are protected by copyright and trademark laws.
- Unauthorized reproduction or manipulation of this manual or product materials is prohibited.
- This manual applies to original Akrapovic products only; warranty coverage is subject to these conditions.

## Preparation and Verification:
- Check the serial number on the muffler's inlet pipe (formatted as YYWWPXXXXX) to ensure authenticity.
- Verify that your motorcycle's ground clearance is secure. Adjust spring preload settings if necessary for advanced users.
- Ensure compliance with local laws regarding noise emissions and air pollution; consult product-related pages on the Akrapovic website or enclosed certificates for specific legal requirements.

## Important Warnings:
- Noise and Emissions: Akrapovic products are not guaranteed to comply with all global regulations. It is the user's responsibility to inform themselves about local laws and ensure compliance.
- California Laws: Aftermarket exhaust modifications may be subject to restrictions; consult California Air Resources Board regulations or seek exemptions for racing use only.
- U.S. State Laws: Individual U.S. states have varying laws regarding aftermarket exhaust systems; check local regulations before installation.

## Tools and Equipment:
- Ensure you have all necessary tools and protective equipment.
- Refer to the torque specifications provided in this manual for correct tightening procedures.