Barclay Faucet Installation.pdf

Parts Included:
- Valve Body, Hose, Cradle, Elephant Spout, 3 Washers, 2 Cone Washers, 2 Large Locknuts, 2 Connecting Nuts, 2 (2 1/4”) Threaded Nipples, 60” Riser, 6” Wall Support, Sunflower Showerhead, Tub Filler with Diverter, Hand Shower, and Shower Ring.

Tools Needed:
- Adjustable Wrench, Slip Joint Pliers, Pipe Putty or Teflon Pipe Tape, 2 Mounting Flanges, Offset Bath Supplies #5577.

Installation Steps:
1. Turn off water and align valve assembly with mounting flanges, secure with nuts.
2. Apply Teflon tape to supply nipples, thread into mounting flanges, and secure shower set to tub.
3. Thread diverter valve onto valve assembly.
4. Attach wall bracket to riser pipe and position cradle bracket on riser.
5. Assemble riser pipe to spout and secure wall support bracket to the wall.
6. Install washers in hose ends and attach hose to cradle and hand shower.
7. Screw showerhead onto riser.

Connecting to Straight Bath Supplies #5577:
1. Put cone washers on tub, connect water supply tubes, and thread nuts onto nipples.
2. Connect brass water supply tubes to house water lines.

Cleaning Instructions:
- Wipe with warm water and soft cloth, avoid soaps, cleansers, or brass cleaners.

Additional Instructions (Page 2):
- Assemble curtain frame using ceiling and wall tees.
- Install wall and ceiling support rods, ensuring they're securely mounted.
- Insert wall and ceiling support rods into respective flanges and tighten set screws.