Boulder Solar Panel Mounting Bracket Installation Guide.pdf

## Installation Guide for Goal Zero Boulder Solar Panels

Safety First:

- Check local building codes before installation.
- Goal Zero is not liable for damage from improper installation.
- Follow all instructions carefully.
- Do not substitute parts from other manufacturers; voids warranty.

Required Tools:

- Electric drill
- Silver marker or pencil
- 5/16” Drill Bit
- 10mm Wrench
- Cardboard or blanket
- Screwdriver for removing kickstand

What’s Included:

- Mounting Brackets (4)
- Split Lock Washers (4)
- Flat Washers (4)
- Hex Cap Bolts (4)
- Hexagonal Nuts (4)

Installation Steps:

1. Measure and Drill:

- Measure 2-4 inches from corner protector to edge of each mounting bracket.
- Drill a hole for the bolt using the bracket as a guide.

2. Remove Kickstand:

- Use a Phillips screwdriver to remove the kickstand from the Boulder Solar Panel.
- Protect the panel's tempered glass by placing cardboard or a blanket on the ground.

3. Attach Brackets:

- Insert a screw through washers, the mounting bracket, and drilled hole.
- Secure each bracket to the solar panel with the included nut.
- Finger-tighten nuts, then use the 10mm wrench to fully secure the bolts.

Optional Layout:

- Experiment with different bracket layouts for optimal sun exposure.