Built-in Microwave Oven Trim Kit Installation Instructions.pdf

## Electrolux Microwave Built-In Trim Kit Installation Instructions (PMTK3080AF)

Summary:

These instructions detail the installation of an Electrolux built-in microwave trim kit (PMTK3080AF) for a 30" microwave oven (PMBS3080AF). Proper installation is crucial for safety and warranty coverage.

Key Points:

Skill Level: Requires basic mechanical and electrical skills.
Safety First: Turn off power at the service panel before starting, and secure a prominent warning device if service cannot be locked out.
Warranty: Improper installation voids the warranty.
Kit Contents: Front Frame Assembly, Exhaust Duct, Mounting Rail, Screws (A & B).
Compatibility: Designed only for use with specified Electrolux built-in microwave ovens.

Installation Steps:

1. Preparation:

Ensure cabinet is level or vertical to the front panel.
Choose a location for the microwave, following manufacturer guidelines and local building codes.
Cutout dimensions: Minimum 16" x 24" x 3" (Illustration 3).
Securely fasten plywood floor within opening to support weight.

2. Electrical Outlet:

Do NOT install outlet in the shaded area on Illustration 3. Refer to local building codes for enclosure requirements.

3. Exhaust Duct Assembly:

Position Exhaust Duct in opening (Illustration 4).
Secure with three screws A (outer holes).

4. Bottom Mounting Rail:

Attach bottom mounting rail to the microwave oven using four screws A (Illustration 5).
Ensure alignment of holes marked "36" between rail and oven.

5. Oven Installation:

Place oven adjacent to opening, plug in power cord.
Carefully guide oven into opening, sliding it onto the Exhaust Duct Assembly (Illustration 6).
Secure with four screws A.

6. Frame Assembly:

Position Frame Assembly square with oven (Illustration 7).
* Secure with two screws B, then secure bottom portion with remaining two screws B (Illustration 8).