ChiliTec LED Einbauleuchten Bedienungsanleitung: Umgang Mit Elektroschrott & Sicherheitshinweise.pdf

## Installation and Safety Guidelines for Flat LED Recessed Lighting

### General Information

- Installation: Only qualified electricians should install the "Flat" recessed lighting fixtures due to the dangers associated with electricity.
- Dimming: Dimmable models require a phase-cut dimmer. The actual dimming range and smooth transition depend on the type of dimmer used and the number of lights per dimming circuit.

### Light Color

- 3000K Models: Emit warm white light, slightly yellowish, ideal for living rooms or bedrooms.
- 4000K Models: Provide nearly color-neutral lighting, suitable for bathrooms, hallways, or work areas.

### Safety Precautions

1. Do Not Open the Product: There are no serviceable parts inside; only qualified personnel should handle it.
2. Avoid Water Exposure: The product must not come into contact with water or other liquids.
3. Temperature and Humidity: Do not expose the product to temperatures above 40°C or humidity levels over 80%.
4. Cable Care: Ensure that the cable is not bent, compressed, pinched, or otherwise damaged.
5. Voltage Check: Verify that the operating voltage of the product matches the network voltage before connecting it.
6. Network Compatibility: The product must be used with a 230V~/50Hz power supply only.
7. Dry Hands Only: Never handle the product, power cable, or plug with wet hands.
8. No Modifications Allowed: Altering, modifying, or expanding the product is prohibited.

### LED Lighting Safety

- Avoid Direct Eye Contact: Do not look directly into the light or at the LEDs to prevent eye damage and potential long-term harm to your eyesight.
- Proper Orientation: Ensure that the lighting fixture is not directed towards people or animals when mobile.
- Ventilation: The product must never be covered during operation; ensure it can dissipate heat effectively to avoid fire hazards.

### Electrical Connection Instructions

1. Wiring: Use a lever clamp or wire nut to connect the two conductors from the power supply.
2. Secure Connections: Ensure that the wires are firmly held in place within the connector and check their security.
3. Grounding: If there is an incoming protective earth (PE) conductor, it must be electrically insulated separately since double insulation inside the fixture makes it unnecessary.

By adhering to these guidelines, you ensure safe installation and operation of your Flat LED recessed lighting fixtures. Always consult or hire a professional if you are unsure about any part of the installation process.