Dunlop DIY Render: Versatile, Easy-to-Use Wall Rendering Solution.pdf

A Comprehensive Summary

Dunlop's Ready-to-Go Render is a pre-mixed, easy-to-use render suitable for both indoor and outdoor applications on various surfaces like brickwork, concrete blocks, painted surfaces, AAC panels, and more.

Key Features:

Ready to use: No mixing required, simply apply with a steel trowel.
Versatile: Applicable thickness range of 1-5 mm.
Fast drying: Touch dry in 2-4 hours, allowing for quick turnaround times.
Durable: Full cure after 7 days, guaranteed for 10 years when installed correctly.
Suitable for DIY and trade: Easy application makes it accessible for both amateurs and professionals.

Application & Surface Preparation:

Suitable for surfaces like brickwork, concrete blocks, AAC panels, etc.
Clean surface thoroughly, removing dust, oil, grease, and loose contaminants.
Green concrete must cure for 28 days before rendering.
Dampen dry surfaces to prevent rapid drying during application.
Joint FC sheets and blueboard as per manufacturer instructions.

Application Process:

1. Apply render with a steel trowel, spreading evenly over the surface.
2. After 10-30 minutes (depending on conditions), work can begin on the desired surface finish - from smooth to coarse.

Finishing & Drying:

Surface finish depends on application technique:
Dense and smooth with a wooden or plastic float.
Coarse and sandy with a sponge.
Textured finishes achieved using a roll-on mix and textured roller.
Rendering surface touch dry in 2-4 hours; allow 24 hours for recoat, full cure takes 7 days.

Coverage & Cleanup:

Coverage varies based on surface condition and site conditions (approx. 6m² at 1mm thickness or 2m² at 3mm thickness per 16kg bucket).
Clean tools with water immediately after use.

Storage & Safety:

Store in a dry place, original packaging, for up to 12 months.
Not suitable for floors; avoid temperatures below 5°C or above 35°C.
Protect rendered surface from rain for 48 hours post-application.
* May cause skin irritation; wear gloves and use a dust mask during application.