Falcon_K_Installatio N_Instructions.pdf

The Falcon K installation instructions consist of 10 steps:
1. Mark the door by drilling 1/8" holes and noting the backset.
2. Drill door holes for the lever assembly, screw posts, and latch installation.
3. Install the latch by marking its position, chiseling, and then installing it.
4. Install the strike by drilling and preparing the jamb latch hole and tracing the strike plate.
5. Install the interchangeable core, if applicable, by inserting the spacer spring and tailpiece, then the control key.
6. Adjust the door thickness using the slider, moving it to the correct scale for the door thickness.
7. Adjust the base plate for the correct door thickness.
8. Install the exterior lever assembly, connecting it to the latch.
9. Install the interior base plate, rose plate, and ensure proper installation for longevity.
10. Install the inside rose and lever, securing the rose and lever with an Allen wrench.