Hinkley Lighting Fixture Installation And Safety Instructions.pdf

## Hinkley Pin Oak Parkway Lighting Installation Instructions Summary

These instructions detail the safe installation of Hinkley Pin Oak Parkway lighting fixtures. They are available in English, Spanish, and French. Key points include:

Safety First:

Always turn off power supply during installation.
Consult local electrical codes and qualified electricians for new wiring.
Use proper tools and follow all safety warnings.

General Installation:

Indoor Fixtures: Connect positive supply wire to positive fixture lead, negative to negative. Secure connections with appropriately sized twist-on connectors.
Outdoor Fixtures: Similar process as indoor fixtures, but use caulk to seal connections and protect from water.
Grounding: Crucial for safety. Follow specific instructions based on fixture type:
Flush Mount: Fasten ground wire to mounting strap with ground screw.
Chain Hung: Loop ground wire under head of ground screw on mounting strap, then connect directly to building system.
Post-Mount: Connect ground wire inside post using twist-on connector and seal with silicone.

Specific Fixture Assembly:

1. Main Body Assembly: Assemble the main body according to diagrams (Drawings 1-3).
2. Glass Installation:
Before installing the glass globe, ensure proper lamping.
Insert the glass globe into the bottom of the fixture body and thread decorative knobs until they touch the glass, ensuring proper alignment.
3. Hand Tightening Only: All knobs should be hand tightened only to avoid damage to glass or fixtures.

Additional Resources:

Refer to I.S. 18 wiring and grounding instructions for detailed procedures and code requirements.
* Consult local electrical authorities for specific guidance.