Hunter Ceiling Fan Installation Manual: Step-by-Step Guide With Tools And Safety Warnings.pdf

# Hunter Fan Installation Manual (50733, 50734, 50735)

## Overview

This manual guides you through installing and operating your new Hunter ceiling fan. It emphasizes safety precautions and provides video links for technical sections. Tools required:

- Basic tools (drill, screwdriver, pliers, wire strippers)
- Optional for support structure mounting: ladder, 9/64” drill bit

## Safety Warnings

- Mount fan directly from building structure or a fan-rated outlet box supporting at least 31.8 kg (70 lbs).
- Disconnect power by turning off circuit breakers before installing or servicing the fan.
- Use an isolating wall control/switch to avoid electrical shock.
- Do not bend blade brackets or insert foreign objects between rotating fan blades.

## Cautions

- Follow national and local electrical codes (ANSI/NFPA 70) for wiring; consult a qualified electrician if unfamiliar.
- Use only Hunter replacement parts.
- This device complies with FCC Part 15 and UL Standard 507.

## Unpacking & Inspection

- Check that all parts are present, including hardware bags with unique symbols.
- Note the fan style and components, such as:
- Canopy, canopy screws, ceiling bracket (wood or machine screws), washers
- Blades, blade screws, blade washers
- Light kit, light kit screws
- Downrod, adapter cover, motor (M3789-01 r011020)
- Remote control, remote cradle

## Installation Location

### Angled vs. Flat Ceilings

- Angled Ceiling: Requires a longer downrod and an Angled Mounting Kit (sold separately). Check ceiling angle; if greater than 34°, use the kit.
- Flat Ceiling: Use a standard downrod or a Low Profile one for a minimal look.

### Checking Room Dimensions & Outlet Box

- Ensure at least 30 inches from blade tip to nearest wall or obstruction.
- Verify that the outlet box is fan-rated and securely installed, supporting at most 70 lbs (31.8 kg).

## Installation Steps

1. Choose Installation Location: Follow angle and dimension guidelines.

2. Install Ceiling Bracket:
- Secure to support structure with wood or machine screws and washers.
- Drill pilot holes for better grip.

3. Attach Downrod (if not pre-assembled):
- Follow the guide provided with your fan.

4. Hang Fan:
- Mount canopy securely, using screws marked on the bag.

5. Install Blades:
- Attach blades to blade screws, ensuring proper alignment.

6. Wire Fan:
- Refer to wiring diagrams in manual for correct connections.

7. Install Light Kit (if applicable):
- Follow manufacturer instructions for light assembly and wiring.

8. Test Fan Operation:
- Turn on power at circuit breaker; test fan functionality, including remote control.

## Troubleshooting

- For any issues, consult the manual or contact Hunter Fan support at 1.888.830.1326.