Instrucciones De Montaje Para El Artículo FR30904/FR30905.pdf

Safety Warning:
- Read wiring and ground instructions (I.S.18) and additional directions.
- Turn power supply off during installation.
- If new wiring is required, consult a qualified electrician or local authorities for code requirements.

Assembly Instructions:
1. Determine Chain Length:
- Estimate the required chain length to hang the fixture at the desired height.

2. Assemble Center Stem and Wire Body:
- Slide the center stem (A) along the wire and thread it onto the top of the center wire body (B).

3. Attach Chain:
- Attach the desired amount of chain to the loop at the top of the center stem (A).

4. Mount Fixture:
- Follow instruction sheet FRIS-19 provided.

5. Install Crystals:
- After installation, install crystals (C) by starting at the marked arrows on the inside of the ring (R).
- Align crystal holes with bracket holes (H), insert brass wire pin (P), and bend the end to secure it.
- Alternate crystals until installation is complete.

Installation Instructions (FRIS 19):
- Step 1: Turn off electrical power.
- Step 2: Mount the bracket (1) to the junction box (a) using original outlet box screws (2).
- Step 3: Attach the canopy (3) to the bracket (1) by sliding the wire loop (4) over the canopy's end, threading the canopy through the loop, and adjusting the height.
- Step 4: Connect the chain to the fixture, slide the collar (5) and cover (b) onto the chain, and secure the canopy against the ceiling by tightening the threaded collar (5) on loop (4).

Safety Warning (FRIS 19):
- Read wiring and connection instructions (FRIS 18) and additional instructions.
- Turn on power during installation.
- If new wiring is required, consult a qualified electrician or local authorities for code requirements.