LED RGB Neon Rope Instruction Sheet.pdf

The POLAR 2 RGB NEON installation instructions provide guidelines for safe and proper installation of the RGB-NF-24V-65 flexible light. Key points include:
1. Cutting increments are marked at 12" intervals, and the light should only be cut at these marks to avoid loss of light.
2. The product should not be operated while coiled, covered, or submerged in liquids, and should not be installed near flammable liquids or in areas with standing water.
3. Only American Lighting recommended drivers, controllers, power connectors, splices, and extensions should be used, and the product should be installed in accordance with current electrical codes and the National Electric Code (NEC).
4. A qualified installer should perform the installation, and the product is for decorative use only, not to be used by children as a toy.
5. The maximum run distance is 44 feet, and the driver should be sized appropriately using 2.7W/ft as a guide, with a maximum load of 90%.
6. Dielectric grease and shrink tube should be used at all power connections, and a ground fault circuit interrupter (GFCI) should be used when installing outdoors.
7. The controller, receiver, and driver should be selected based on the application, and the Trulux app can be used with WIFI receivers for zone control.