Manuale Di Installazione AMCGS1.pdf

## GS1 Microphone Sensor Installation Instructions

The GS1 is a glass breakage and pressure sensor with a range of up to 7 meters. It offers adjustable sensitivity settings via dip switches and a trimmer, allowing for customization based on specific needs.

Key Features:

Detects shock, glass breakage (including different frequencies for reduced false alarms), and opening/closing of doors and windows.
Adjustable range through trimmer control.
Selectable operating mode via dip switches.
Tamper switch included for anti-opening protection.
13.8V power supply with low current draw.
ABS plastic housing, measuring 77mm x 36mm x 20mm.

Installation:

1. Open the sensor using a thin tool (e.g., mini screwdriver) by pressing the tab.
2. Drill the mounting holes in the baseplate.
3. Secure the sensor with the provided screw, ensuring tamper protection.
4. Feed the cable through the designated knockout hole.
5. Connect the sensor to the power supply and alarm system according to the wiring diagram.

Wiring:

Power: 13.8Vdc (supply) - +/- terminals
Alarm Contact: 100mA - 40V - 2.5-16Ω - N.C. (Normally Closed)
Tamper Switch: Max 40mA - 30Vdc
Trimmer: Used to adjust microphone range and sensitivity.
LED: For testing and alarm indication.

Specifications:

Operating Temperature: -10°C to +55°C
Storage Temperature: -20°C to +60°C
RFI Protection: 30 V/m (80/2000 MHz)

Important Notes:

Installation must comply with local regulations and be performed by qualified personnel.
The manufacturer disclaims liability for unauthorized modifications or repairs.
* Regular testing is recommended to ensure optimal performance.