MRLDX.5 Manual.pdf

• INTERNAL DRIVER – PLUG & PLAY
• 500 MICROSECOND AUTO BURST TECHNOLOGY
• POWERED BY 24VDC INDUSTRY STANDARD
• M12 CONNECTOR FOR QUICK DISCONNECT
• PNP AND NPN INPUTS
• ANALOG 0-10VDC INPUT INTENSITY CONTROL
• POTENTIOMETER INTENSITY CONTROL
• COGNEX SERIES 7000 & 9000 (CTL) CAMERA TO LIGHT COMPATIBLE
• HIGH OUTPUT LED’S
Mounting 3.5” Ring Light Only:
Mounting holes accept M4 screw size, 14mm screws and aluminum spacers included
Dimensions:
Model MRLD3.5: 5.04” x 4.38” x 1.44”, 13.6 oz, Mounting Holes 1.42” x 1.18”
Model MRLD5.5: 7.75” x 6.75” x 1.35”, 19.9oz, Mounting Holes 2.874” x 1.339”
Wiring:
Pin #1: +21.6 to +26.4VDC, Pin #2: NPN Strobe Input, Pin #3: 0VDC, Pin #4: PNP Strobe Input, M12 Pin #5: 0-10VDC analog intensity control
Configuration:
Burst mode enabled/disabled via dip switch, Adj. Range switch sets potentiometer and 0-10VDC input adjustment range
Switch Settings:
Adj.Range OFF, Burst OFF: 0-10VDC input adjusts LED intensity from 100-0% with burst disabled
Adj.Range ON, Burst OFF: 0-4.5VDC input adjusts LED intensity from 100-0% with burst disabled
Adj.Range OFF, Burst ON: 0-10VDC input adjusts LED burst intensity from 100-~50% with burst enabled
Adj.Range ON, Burst ON: 0-10VDC input adjusts LED burst intensity from 100-0% with burst enabled