NG To LP Piped Systems Kit (PDF).pdf

IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN. THE INSTRUCTIONS HEREIN SHOULD BE PERFORMED BY A QUALIFIED SERVICE TECHNICIAN. THE APPLIANCE MUST BE COMPLETELY COOL AND THE PREVIOUS GAS SOURCE MUST BE SHUT OFF OR REMOVED BEFORE ATTEMPTING INSTALLATION. Some parts inside your grill or side burner have sharp edges, so care must be taken when handling components to avoid personal injury. Wear gloves when handling.

TOOL REQUIREMENTS:
- Work gloves
- Safety glasses
- Phillips & Flat-blade screwdriver
- Pipe wrench or large slip-joint pliers
- Adjustable Wrenches (2)
- Thread sealant
- 1/2” deep socket wrench with short extension
- Assorted combination wrenches (5/16, 1/2, 5/8, 3/4, 7/8 inch)

IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.

DANGER:
- If you smell gas: shut off gas to the appliance, extinguish any open flame, open lid, and if odor continues, keep away from the appliance and immediately call your gas supplier or your fire department.
- Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance.
- An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

READ THIS MANUAL CAREFULLY AND COMPLETELY BEFORE USING YOUR GRILL TO REDUCE THE RISK OF FIRE, BURN HAZARD, OR OTHER INJURY. KEEP THIS MANUAL FOR FUTURE REFERENCE.

APPLICABLE APPLIANCES:
- GRILLS - GABR / GSBR / GMBR / EAB / EABR / EMB / EMBR
- SIDE BURNER - AGB / AEB

MODIFYING REGULATOR (FOR UNITS WITH NATURAL GAS):
- The kit includes all the necessary orifices to convert your burners to LP fuel, and special instructions to modify the regulator.
- Connect to your LP Piped System using a minimum 1/2” diameter flexible (semi-rigid) stainless steel gas hose.

GAS SUPPLY:
- The local gas authority or supplier should be consulted at the installation planning stage in order to establish the availability of an adequate supply of LP gas.
- Gas connections should be made by a qualified plumber, or your professional outdoor appliance service technician.

CHANGING ORIFICES - GRILL:
- Open your grill and remove the grates, radiant trays, and burners from the firebox area.
- Beginning with the Infrared Burner in the upper canopy area of the grill, access the spud orifice and disconnect the flex hose first.
- Remove the screws securing the control panel to the front of the grill and carefully tilt down the control panel.