Piatto™ Collection Automatic Paper Towel Dispenser Specifications.pdf

Piatto™ Collection Automatic Paper Towel Dispenser holds and dispenses one 8" diameter [Ø203] x 8" wide [203] standard towel roll up to 800 ft. (244m) long and one 8" wide [203] stub roll up to 4" diameter [Ø102], automatically changing to the main roll when the stub roll is finished if feed tabs are engaged. Powered by four (4) D-size batteries (not supplied), it dispenses towels automatically when hands are placed in the sensor zone, with the length determined by the owner via length, delay, and paper saver switches. It features an internal towel cut-off bar and a deburred dispensing edge. The frame and cabinet are made of 20-gage type 304 stainless steel with concealed fastening devices. The door is 1/2" [13] thick black-edged Phenolic with matte black or white surfaces, attached with concealed hinges and a spring-pin L-latch. Structural assembly is welded. OM & IG, installation set-back gage, and depth stops are included.

Model № 645210A-XX (Replace -XX with -00 for White or -41 for Matte Black) is manufactured by American Specialties, Inc.

Installation requires mounting in a wall recess with four (4) № 10 x 1-1/2" [M5 x 38] Pan Head self-tapping screws (by others) through concealed mounting holes. For ADA compliance, the towel dispenser outlet should be 48" [1219] maximum above the finished floor (AFF). The Finished Wall Opening (FWO) required is 16-1/8" [410] W x 28-1/16" [713] H x 10" [254] D minimum.

Towels are dispensed automatically when hands are placed in the sensor zone. The length is predetermined by the owner via switches. The unit can be reloaded with a full roll to start automatically after a partial roll is finished. Refilling involves opening the door and replacing the towel roll. The LED indicates sensing and battery condition.