PoisonFrog CV Axle Shaft Kit Installation Guide.pdf

Kit Contents:
- CV axle shaft (left)
- CV axle shaft (right, inner)
- CV axle shaft (right, outer)
- Dust baffle
- Self-tapping screw with pad
- Axle disconnect slide clutch collar
- Shaft circlip
- CV seal
- Bushing for inner axle shaft

Installation Notes:
- Read instructions thoroughly and assess personal experience before starting.
- Check all parts are included; contact dealer if any are missing.
- CV seal installation is correct if no gap is visible between the seal and CV joint after locking the steering.
- Dust baffle should be flush with the axle port.
- Use gear oil marked 75w-140 for differential lock axles, 80w-90 for others.
- Grease CV joints using a needle tip grease adapter, but no additional grease is needed initially.
- Tighten half shaft nut and bearing cap bolts to 136 Nm (108 ft. lbs.) and 100 Nm (80 ft. lbs.) respectively.

Warranty Information:
- One-year warranty on workmanship and materials.
- Warranty covers repair or replacement of defective products.
- Warranty does not cover removal, installation, freight, incidental, consequential damages, or other vehicle parts.
- Warranty claims can be made via email to [email protected] (closed on weekends and major holidays).
- Normal wear parts and discontinued products are not covered.
- Incidental or consequential damages, roadside service, labor charges, and personal property loss are excluded.