RailSplit Uno User Guide.pdf

- Safety & Usage:
- Professional use only, install by qualified technician following electrical regulations.
- No user-serviceable parts inside the outer case.
- Disconnect from power supply when not in use.
- IP rating specific to use, indoor use unless otherwise stated.
- Avoid rain, moisture, and liquid penetration.
- Recycle packaging.

- Product Overview:
- Fully bi-directional DMX512 isolator and signal booster with 'data fixer' for DMX.
- Industry-leading protection on input, output, and power terminals.
- Electrocution protection (self-healing) on DMX512 ports (up to 425 VAC continuous connection).
- Surge protection on all terminals, sacrificial and fails short-circuit for continued protection.
- DMX512 output protection failure or shorted cable indicated on front panel and via fault tally output.

- Key Features:
- Input optical isolation, bi-directional outputs, optimized for noisy environments.
- Mains electrocution protection, surge protection, front panel fault indication, and fault report tally output for BMS integration.
- RDM supported, surface mount or DIN rail mounted, DMX-Fix mode for compatibility issues.

- Connections:
- DMX512 input via three screw terminals, can also be used as a passive loop-through connection.
- Output drives 32 additional DMX512 devices, terminator required for the final device.
- XLR pin convention: 1-Ground (Black), 2-Data - (Blue), 3-Data + (Red).

- Application Diagram:
- Shows typical application usage.
- Internal earth interconnection and isolation summarized in table, DMX512 inputs isolated, outputs PSU referenced.