Rako RSRDMX User Guide.pdf

Rako RSRDMX modules are 15 Channel DMX controllers for use with DMX drivers, typically controlling 3/4 colour light fittings. They can be controlled by any Rako device that transmits wireless RAKOM messages. The modules should be mounted in areas that are adequately ventilated, dry, and outside of any enclosed metal casings that may interfere with the wireless signal. Connections are made by removing the bottom two fixing screws and removing the main lid, then connecting the 12V dc supply and DMX data. The module's address can be set manually or using RASOFT programming software, and it will automatically assign the next 14 channels sequentially. The factory set address is House 1 Room 4, and the module can be controlled by a Rako wireless wallpanel set to this address. The module has a set-up button that can be used as a manual On/Off switch, and it can be programmed to respond to multiple control panels. The internal LED will flicker when the module receives any Rako wireless message, and it will pulse when a transmitter with the same address is put into programming mode. The module has a default setting to start a colour cycle when it receives a Fade Up command, and it can be re-addressed in the normal way. Rako modules contain no user serviceable parts, and any issues should be reported to the customer help line.