Raychem EPP-1769-EE-4/16 Assembly Instructions.pdf

Raychem RSTI-CC-68xx, 800A screened connection for 36-42kV single-core plastic cables, EN 50181 'C' profile.
- Safety Warning: Follow all safety guidelines when working with high-voltage equipment. Consult a safety specialist for precise information.
- Before Starting:
- Check if the kit matches your cables.
- Ensure components haven't been updated since your last installation.
- Read the guide thoroughly and follow the operation sequence.
- The guide is intended for trained cable installers competent in proper installation. TE Connectivity does not regulate local conditions affecting installation quality.
- Kit Contents: Includes various parts like bodies, cone adapters, assembly gauge, tin-plated copper washers, nuts, screws, etc.
- Cable Sizes: Ranges from 36 to 42 kV, with various cable diameters and cross-sectional areas (mm²).
- Installation Steps:
- Clean 1m of the cable's outer jacket.
- Position the cable with sufficient overlap in the installation area.
- Cut and remove the cable jacket, and the metal tape holding it.
- Cut the cable conductor according to the provided diagram.
- Remove the conductor's insulation using the specified tool.
- Prepare the cable by wrapping it with a tie-down strap.
- Install the cone adapter by pressing it onto the cable jacket.
- Install the connector body using the specified tool.
- For large conductor sizes (240 mm² and above), chamfer the insulation end.
- Install the connector using the specified tool.
- Safety Information: Follow all safety guidelines and regulations when handling high-voltage equipment.