S500-P Manual.pdf

50 GPD / 189 LPD
Water storage tank: 3.2 gallons / 12.2 liters
Input: AC 110Volt, 220Volt or 240Volt (50/60Hz)
Operation pressure: 10-100 psi
Dimensions: 27(L) x 39.8(H) x 22.5(W) cm
Weight: 8.5 kg

Key Components:

Reverse Osmosis (RO) membrane
5-micron sediment filter
Granular Activated Carbon (GAC) filter
Post-carbon filter
Infra-red cartridge filter
Mineral cartridge filter
UV water sterilizer (optional)
TDS meter (optional)

Maintenance Schedule:

Change pre-filter cartridges every 6 months
Change RO membrane every 2 years
Check and replace other components as needed

FAQ:

The system produces 50 gallons of water per day under ideal conditions
The system removes up to 95% of dissolved minerals and chemicals
The taste of the water depends on the amount of contaminants in the tap water
The system can be connected to an extra faucet or refrigerator
The system has a 1-year guarantee for material and workmanship

Installation and Operation:

Connect all components according to the tubing connection diagram
Turn on the water and check for leaks
Flush the system for at least 30 minutes before first use
Open the shut-off valve on the tank and close the sink top faucet after initial flushing
The tank will fill with water in 2-3 hours after the tank has filled, open the sink top faucet.