SMARTprofile Install.pdf

The PE SMARTprofile installation procedure involves handling and installation instructions for a distributed deformation and temperature sensor. The sensor has an active zone that measures deformations and temperature, and passive zones that connect the active zone to a reading unit or connection box. To avoid damage, the active zone must not be excessively bent, twisted, tensioned, or squeezed, and the passive zone must be protected from mechanical actions, dust, water, and chemical agents. The installation method depends on the construction material and can be done by gluing, welding, or clamping with gluing. The sensor should be installed with its x-axis parallel to the monitored structure, and the gluing process requires careful preparation and compatible glue. The installation should ensure good shear bonding between the sensor and the structure, and the extremities of the sensor should be secured with small metallic clamps.