TV Mount Manual.pdf

less than 132 lbs (60 kg)
Wall type: wood stud or solid concrete
Tools needed: tape, measure, pencil, screwdriver, electric drill, socket wrench, stud finder, wood drill bit, masonry drill bit, hammer

Important Safety Information

Do not exceed maximum weight limit
Use only with recommended wall types
Manufacturer not responsible for damage or injury caused by incorrect assembly or use

TV VESA Compatibility

Check TV VESA size: within min and max size (200mm-600mm)

Mounting Hardware

TV brackets: x2
Spacers: x4
TV screws: M4x12mm, M6x12mm, M8x25mm, etc.
Washers: x4
Lag bolt: x4
Wall plate unit: x1
Allen key: x1
Extension arm: x2
End support: x2

Installation Steps

1. Select TV screws and attach TV plate
2. Position wall plate and drill pilot holes
3. Install wall plate using lag bolts and washers
4. Attach extension arm and end support

Caution

Avoid potential personal injury or property damage
Drywall covering must not exceed 5/8 in (16 mm)
Minimum wood stud size: 2 x 4 in (51 x 102 mm)
Maximum horizontal space between fasteners: 16 in (406 mm)
Stud center must be verified