取扱説明書.pdf

Do not hang laundry exceeding 12kg.
Do not apply strong vibrations to the pole.
Do not hang wet items directly.
Hang laundry after thorough dehydration and evenly on the pole's wire.
Ensure good ventilation in the room to prevent mold and mites.
Avoid direct sunlight, heat, or strong winds from air conditioners.
The pole's height should not exceed 65cm from the ceiling.
Adjust the height when the pole has no laundry.
The product may have twists or bends due to natural wood characteristics or humidity changes.
Heavy loads may cause the pole to bend, but it will return to its original shape when unloaded.
Do not place heaters or other heating devices under the indoor clothes dryer.
Do not place children or fragile items under the dryer.
If the pole falls, immediately collect the parts and contact the manufacturer.
For cleaning, use a soft cloth with diluted neutral detergent and wipe with water, then dry with a clean cloth.
Avoid using benzene, thinner, or acidic detergents, which may cause deformation or discoloration.
If the pole becomes slanted, adjust the height adjustment device on the slide rail to level it.
If the pole falls, collect the parts, dispose of the fallen pole, and contact the manufacturer for assistance.
The product has a safety feature that allows the pole stopper to release and the pole to fall in case of excessive load to prevent ceiling damage.
Once a part has fallen, its strength is reduced, and it cannot be reused; purchase a new one instead.
The product's quality and performance may be affected by various factors, including natural wood characteristics and humidity changes.
Ensure proper installation and maintenance to prevent accidents and damage.
The product is designed for indoor use only and should not be used outdoors or for other purposes.
The maximum load capacity is 12kg; exceeding this may cause the pole to fall and result in injury or damage.
Regularly check the product's condition and perform maintenance as needed to ensure safe and proper use.
In case of any issues or concerns, contact the manufacturer's customer service for assistance.