Letöltés.pdf

The guide provides instructions for designing the graphics of an auto-locking bottom and plug-in flap box. Key points include:
- Stanc lines (continuous black lines) indicate where the box will be cut from the paper roll.
- Cutting marks should be set when saving the finished layout to position the graphic on the stanc tool.
- The front side is marked with green stripes, and the recommended direction of the graphic is provided for aesthetic purposes.
- Formalak elhelyezése (formalakk placement) requires a direct color to indicate the area to be formalakked.
- Bieg lines (red lines) indicate where the box should be folded.
- Non-visible surfaces are marked with gray fill and should not contain important graphic elements.
- A 3-5 mm bleed is required due to material stretching during production.
- The design should be created using the provided stanc drawing and guidelines, with separate layers for the stanc drawing, guide lines, and graphic elements.
- The ISO Coated Fogra 39 color profile is recommended, and the document should not contain RGB colors.
- The PDF file should be saved in the PDF/X (X-1a, X-3, X-4) standard, with a minimum resolution of 200 dpi and a 1:1 scale.