PEGAPRIM ISOFIX: Ultra Adhesive, Fast-Drying Universal Primer For Interior And Exterior Use.pdf

PEGAPRIM ISOFIX is a universal adhesion primer with super adhesion and stain-blocking properties, based on solvent-borne shellac-resins. It dries very fast, forms a closed, adhering paint film, masks odors, and can be recoated with most water and solvent-borne decorative paints. Suitable for application at freezing temperatures, it is recommended for interior and exterior use, particularly for adhesion on metal surfaces like copper, bronze, and stainless steel, as well as smooth hard surfaces such as old paint layers and Formica. Exterior applications are limited to spot priming as a sealer.

Technical data includes density of ±1.2, satin gloss grade with ±10% at 60°, solid content by weight of ±54%, and volume of ±30%. Drying times at 20°C/50% relative humidity are 15 minutes for touch dry, 45 minutes for recoatable, and fully cured in one day. Recommended wet film thickness is 100 µm, with a dry film thickness of 30 µm. Theoretical coverage is approximately 10 m²/l, but practical coverage varies based on substrate porosity and roughness.

Surface preparation requires the substrate to be clean, dry, stable, and degreased if necessary. Coating materials should be thoroughly stirred before use. Application conditions are above -1°C and below 80% relative humidity. It can be applied undiluted by roller or diluted with ±2% volume denatured alcohol for airless and air atomized spray application.

Safety data indicates a VOC level of 480 g/l, categorized as A/i, with a maximum limit of 500 g/l. Equipment should be cleaned with denatured alcohol, and additional alcohol may be added if evaporation is too fast during spraying. The product has a minimum shelf life of three years when stored in dry, well-ventilated areas away from direct sunlight at temperatures between 5° and 35°C.

For more information on available colors and packaging sizes, refer to the website www.rust-oleum.eu. Rust-Oleum disclaims liability for consequential or accidental damages and advises users to verify product suitability independently. Products should be stored, handled, and used according to Rust-Oleum's recommendations as per the latest Safety Data Sheet (SDS), which can be downloaded from their website or requested from customer service.