Door Reversal Instructions.pdf

To reverse the door swing on a dryer, follow these steps:
1. Place a towel on the dryer to avoid damaging the surface.
2. Remove the bottom screws from the dryer cabinet side of the hinges and loosen the top screws.
3. Lift the door off the top screws and set it on top of the dryer.
4. Remove the screws attaching the hinges to the door and the screws holding the inner and outer door together.
5. Separate the outer door from the inner door and set it aside.
6. Switch the door catch, bezel, and plug to the opposite side of the inner door.
7. Rotate the outer door 180° and reattach it to the inner door.
8. Flip the door over so the handle side is down.
9. Reattach the door hinges to the dryer door.
10. Remove the door strike and plug from the dryer cabinet and reinsert them on the opposite side.
11. Transfer the hinge hole plugs or covers from the left side to the right side of the dryer cabinet.
12. Insert screws into the hinge holes on the dryer cabinet and tighten them.
13. Check the door strike alignment and adjust if necessary.