Outdoor Pan/Tilt Wi-Fi Security Camera Quick Start Guide.pdf

Plug in the adapter to power up your camera.
STEP 1
STEP 2
STEP 3
Tap the button in the app and select your model. Follow the app instructions to complete setup.
Scan to download
1
2
3
4
6
7
7
1
3 Lens
4 System LED
2 Microphone
IR LEDs
5 Reset
microSD Card Slot
Speaker
Insert a microSD card for local recording.
microSD card not included.
Blinking red and green
Blinking red slowly
Solid amber
Blinking red quickly
Solid red
Solid green
Blinking green quickly
Starting up
Connected to the cloud
Ready for setup
Connecting to Wi-Fi
Connected to Wi-Fi
Camera resetting
Camera updating
6
5
microSD
Use a pin to press and hold for 5 seconds to reset the camera.
Safety Information
For technical support, the user guide, and more information, please visit www.tapo.com/support/
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tapo.com/support/ce
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't hesitate to contact us.
• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not use the product if the casing has been broken. Danger of electric shock.
• Never touch the product with wet hands.
• Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorised electrician.
• This product is not intended to be used when providing medical care. Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids to determine if they are adequately shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the product from the power outlet.
• This product may interfere with other electronic products such as TV, radios, personal computers, phones or other wireless devices.
• Adapter should be used indoors where the ambient temperature is lower than or equal to 40ºC.
• Operating Temperature: -30 ºC ~ 60 ºC (-22°F ~ 140°F )
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Option 2: Pole Mount
1. Mount Camera Bracket
2. Install Camera
3. Connect to Power
Male Power Connector
Waterproof Seal
Female Power Connector
*Pole-mounting loops
(not included)
Mounting Instructions
(Two Options)
Stick the mounting template to the desired mounting place. Drill four screw holes according to the template.
Option 1: Wall Mount or Overhang Mount
1. Drill Holes
2. Install Camera Bracket
3. Install Camera
4. Connect to Power
Route the power cord through the opening of the camera bracket.
Insert four mounting anchors into the holes and use the mounting screws to affix the bracket over the anchors.
5. Connect to Power
Male Power Connector
Waterproof Seal
Female Power Connector